Many well know high street brands asked us to supply their shop fronts.
Most of these took just six weeks to complete from the initial enquiry. Although this demonstrates our capabilities when necessary, more time allows the problems to be resolved at a more controlled pace.
Large open shop front with the main support structure and steel roller screen mechanism concealed within decorative painted toughened glass cladding. The soffit panels are 13.5mm toughened laminated glass bolted into the steel structure. Vinyl graphics were applied to the rear of the glass before fixing.
Very thick 31.5mm toughened laminated low-iron glass shop front. Support is provided by aluminium perimeter channels, so the glass does not require support fins. Painted, toughened low-iron glass clads internal walls and columns, with low-iron silvered float glass used for decorative features within the shop.
A triple-height glazed shop front using 19.5mm toughened laminated glass. Sections are joined using specially-designed countersunk support brackets secured at the head using toughened glass fins for maximum strength yet minimal appearance. Toughened glass door entrance supported on patch fittings. Central glass panels were drilled to allow the Paperchase logo to be bolted on to the shop front as a decorative feature.
A two-storey toughened laminated glass shop front, supported on internal toughened glass fins bolted into the head to allow movement in the building. The glass panels are secured at the centre by a specially designed four-arm clamping system providing maximum strength, but keeping the structural appearance to a minimum. Toughened glass doors are supported on patch fittings.
An open, welcoming shop front. The main support structure is concealed by cladding using back-painted toughened glass panels.
Designed to be completely frameless, this shop front features 19.5mm toughened laminated low-iron glass and toughened glass entrance doors. The glass was secured using perimeter channels for the full height panels. Transom panels (above the door) are secured with specially designed countersunk strap fixings. These keep the structural elements to a minimum, while allowing movement in the head without the need for support fins
19.5mm toughened laminated glass panes are bolted back to support posts, designed as a feature of the shop front. The crystal signage, which is viewed from both the internal and external elevations, was bolted through the glass. Back-painted white toughened glass panels form decorative panels to clad the internal high level and side walls.